This is a quick prototype that turned out to be quite usable. The
design is minimal: some home-made ORM for the feed storage, crude
parallelism with the
multiprocessing module and a simple plugin
More information about known issues and limitations in the feed2exec manual page document.
The most common workflow is through the fetch subcommand and goes something like this:
__main__.pyis the main entrypoint, managed through the
clickmodule, which normally calls function defined in
feed2exec.feeds.FeedManagerobject which gets passed to subcommands. In our case, it passes the control to the
- The fetch command calls the
feed2exec.feeds.FeedManager.fetch()function which creates a
feed2exec.feeds.Feedobject that is then used to parse the feed and return it as an opaque data object as returned by
fetchthen calls the
feed2exec.feeds.FeedManager.dispatch()function that calls the various filter and output plugins, passing in the feed configuration and one item at a time. The filters can modify the feed items while the output plugins are responsible for writing them somewhere. That distinction is mostly arbitrary, but the return values of the output plugins matter, while filters do not.
The feed cache is stored in a minimal
sqlite3 database. That
database could be extended to keep the body of the feed and other data
to enable more powerful features, but I haven’t had the need for this
Configuration is stored in a
.ini file or whatever
configparser supports. It was originally stored in the database
as well, but it was found inconvenient to modify by hand and a
configuration file was used instead. The
.ini file format was
chosen because it is well supported by Python and allows for default
There is the possibility for this project to cover more than RSS/Atom
feeds. In theory, the
parse function could also be pluggable and
support reading from other data sources like Twitter or Facebook,
which would bring us closer to the IFTTT concept.
The plugin system uses a simple
importlib based architecture
where plugin are simple Python modules loaded at runtime based on a
module path provided by the user. This pattern was inspired by a
The following options were also considered:
Those options were ultimately not used because they add an aditionnal
dependency and are more complicated than a simple
import. We also
did not need plugin listing or discovery, which greatly simplifies our
There is some code duplication between different parts (e.g. the
plugin interfaces, the
mbox plugins, etc), but
never more than twice.
The threading design may be a little clunky and is certainly less
tested, which is why it is disabled by default (use
use it). There are known deadlocks issues with high concurrency
scenarios (e.g. with
I had multiple design in minds: the current one
asyncio branch) vs
pool.map (on the
aiohttp design was very hard to diagnose and debug,
which made me abandon the whole thing. After reading up on Curio
and Trio, I’m tempted to give async/await a try again, but that
would mean completely dropping 2.7 compatibility. The
design is just badly adapted, as it would load all the feed’s
datastructure in memory before processing them.
This is also hooked into the
setup.py command, so this also works:
python3 setup.py test
Enabling the catchlog plugin will also enable logging in the test suite which will help diagnostics.
Note that some tests will fail in Python 2, as the code is written and tested in Python3. Furthermore, the feed output is taken from an up to date (5.2.1) feedparser version, so the tests are marked as expected to fail for lower versions. You should, naturally, run and write tests before submitting patches. See the Writing tests section for more information about how to write tests.
The test suite also uses the betamax module to cache HTTP requests
locally so the test suite can run offline. If a new test requires
networking, you can simply add a new test doing requests with the
right fixture (
feed2exec.tests.fixtures.betamax()), and a new
recording will be added to the source tree. Note that you can also use
betamax_session() fixture provided upstream if you
are going to do standalone HTTP request (not going through the
feed2exec libraries). If a new test is added in an existing test,
you may need to configure recording (in
config.default_cassette_options['record_mode'] = 'none'
We commit the recordings in git so the test suite actually runs
offline, so be careful about the content added there. Ideally, the
license of that content should be documented in
vcrpy was first used for tests since it was simpler and didn’t
require using a global
requests.session.Session object. But in
the end betamax seems better maintained and more flexible: it supports
pytest fixtures, for example, and multiple cassette storage (including
vcr backwards compatibility). Configuration is also easier, done in
feed2exec/tests/conftest.py. Using a session also allows us to use
a custom user agent.
feed2exec is a fairly new and minimal program, so features you may
expect from another feed reader may not be present. I chose to write a
new program because, when I started, both existing alternatives were
in a questionable state: feed2imap was mostly abandoned and
rss2email’s maintainer was also unresponsive. Both were missing the
features I was looking for, which was to unify my feed parsers in a
single program: i needed something that could deliver mail, run
commands and send tweets. The latter isn’t done yet, but I am hoping
to complete this eventually.
The program may not be for everyone, however, so I made those comparison tables to clarify what feed2exec does compared to the alternatives.
- version: the version analysed
- date: the date of that release
- SLOC: Source Lines of Codes as counted by sloccount, only counting dominant language (e.g. excluding XML from test feeds) and excluding tests
- Language: primary programming language
- maildir: writing to Maildir folders. r2e has a pull request to implement maildir support, but it’s not merged at the time of writing
- IMAP: sending emails to IMAP servers
- SMTP: delivering emails over the SMTP protocol, with authentication
- sendmail: delivering local using the local MTA
- exec: run arbitrary comands to run on new entries. feed2imap has a
execurlparameter to execute commands, but it receives an unparsed dump of the feed instead of individual entries. rss2email has a postprocess filter that is a Python plugin that can act on indiviual (or digest) messages which could possibly be extended to support arbitrary commands, but that is rather difficult to implement for normal users.
- pause: feed reading can be disabled temporarily by user. in feed2exec, this is implemented with the
pauseconfiguration setting. the
catchupoption can also be used to catchup with feed entries.
- retry: tolerate temporary errors. For example,
feed2imapwill report errors only after 10 failures.
- images: download images found in feed.
feed2imapcan download images and attach them to the email.
- filter: if we can apply arbitrary filters to the feed output. feed2imap can apply filters to the unparsed dump of the feed.
- reply: if the generated email ‘from’ header is usable to make a reply.
use-publisher-emailsetting (off by default) for this, for example. feed2exec does this by default.
- digest: possibility of sending a single email per run instead of one per entry
feed2imap supports only importing OPML feeds, exporting
is supported by a third-party plugin.